rss icon Subscribe
desktop mobile

Rolls-Royce Unveils New Podded Propulsion Range

(Image: Rolls-Royce)

Rolls-Royce has launched a new range of smaller, more compact podded propulsion systems: the ELegance pods - one with an open propeller, the other ducted.

Per Nahnfeldt, General Manager Product - Electric Propulsion, Rolls-Royce, said, "For many years we have recognized the gap in the propulsion market for smaller pods, including ice-class, in the 1.5MW to 7MW power range. These new pods - based on our Permanent Magnet technology - complement our broad product portfolio and sit well with our range of frequency drives and electrical systems. We can now provide a complete fully electric propulsion package."

The use of permanent magnet (PM) motors in podded propulsion provides a high motor efficiency over all speed ranges. Their use also results in a pod that optimizes the trade-off between electric, mechanical and hydrodynamic efficiency, the manufacturer said.

Andreas Seth, Rolls-Royce SVP Electrical, Automation & Control - Marine, said, "Our PM technology and knowhow has become a game changer for many of our product innovations. In this case the PM technology and the motor fitting in the casing have allowed us to create a sleek, slimline pod, which adds significantly to hydrodynamic efficiency."

Nahnfeldt added, "The pods feature a 'twin tail' concept to further improve efficiency while significantly reducing cavitation-induced noise and vibration. A new integrated hull fitting interface also allows a compact head-box to be used, which minimizes drag and further improves hull efficiency. This also allows the height and tilt of the pod to be adjusted, allowing operators to select the optimum propeller size for the vessel."

The 1A Super and Polar Code 6 ice class pods have also been designed with installation and maintenance simplicity in mind. For example, should the pods need to be replaced they can be lifted and mounted in water. This builds on the experience from the underwater mounting of Rolls-Royce azimuthing propulsors and provides a means for replacement of the complete units, including the steering gear, for ease of maintenance and service in, as well as out of, drydock.

"Both pushing and pulling pods have been designed with several layers of redundancy on critical and hard-to-reach components, with service points positioned for easy access," Nahnfeldt said.

Rolls-Royce noted that maintenance is optimized by way of fewer moving parts within the below-the-waterline housing and the only components that require dry-docking service are the pod's bearings and seals. These however have a life expectancy of 10 years or more before they need replacing.

"This reduced maintenance requirement correlates directly to low life-cycle costs," Nahnfeldt said, adding that with a focus on environmental safe operation, the robust sealing solution that has been selected has no oil-to-sea interfaces. Should system oil leak at all, it is fed into a dedicated sump connected to the ship's bilge system.

Rolls-Royce is now building a 4.6MW ELegance pod at its Rauma facility in Finland and is in discussions with shipowners to install the pod in a pilot project.

Sep 4, 2018

 QRCode for link to Rolls-Royce Unveils New Podded Propulsion Range story
 

New Products

Wärtsilä Rolls Out New Solid State Radar

Wärtsilä Nacos Platinum solid state S-Band radar system (Image: Wärtsilä)

Wärtsilä introduced its new Nacos Platinum solid state S-Band radar system at the SMM trade fair

Siemens Launches Scalable Electric Drive

Siemens is expanding its portfolio of green ship propulsion systems by adding a new member to the Siship BlueDrive Family: Siship BlueDrive Eco. Besides by integrating battery

AEGIR-Marine to Unveil Propulsion Controls System at SMM

(Photo: AEGIR-Marine)

Dutch-based AEGIR-Marine said it will roll out its own branded propulsion controls system at this

Marine Equipment

Odfjell Says It Will Not Install Scrubbers

(Photo: Odfjell)

Chemical tanker firm Odfjell said it will not invest in scrubbers to clean fuel on its vessels to

Maersk to Install Scrubbers on Select Vessels Ahead of 2020

(File photo: Maersk Line)

A.P. Moller-Maersk, the world's biggest container shipping group, will add devices to reduce

Dellner Brakes Acquires JHS Jungblut

Dellner Brakes JHS passive yaw sliding bearing for wind turbines (Image: Dellner Brakes)

Swedish-based marine and industrial brake supplier Dellner Brakes said it has acquired German

Marine Propulsion

Rolls-Royce Launches New LNG Bergen Engine

(Image: Rolls-Royce)

Rolls-Royce has unveiled the Bergen B36:45 model, its latest in a series of liquefied natural gas

ZF Condition Monitoring Optimizes Operations

The ZF Condition Monitoring System for marine propulsion systems increases operational safety by monitoring the core components in the driveline. (Image: ZF)

Monitoring current data from the driveline as well as the status of core components makes it

Shell Marine Discusses Engine Protection Beyond 2020

Joris Van Brussel, General Manager of Shell Marine (Photo: Shell Marine)

Marine lubricant choices to address International Maritime Organization (IMO) restrictions on the