rss icon Subscribe
desktop mobile

Transas Survival Craft Simulator Eliminates Drill Risks

Photo: Transas

Posted by Michelle Howard

Transas has introduced a new Survival Craft Simulator (SCS) to prepare crew for the multitude of possible scenarios that can occur during lifeboat drills, aiming to address one of the most notorious sources of accidents in shipping without exposing personnel to physical danger.
Effective survival craft training is essential to prepare crew for a disaster at sea but practical lifeboat drills have a troubling track record for causing fatalities. By shifting some elements of training to a simulated environment, the risks are minimized and the crew can focus on the procedures that will increase safety when operating the real lifeboat equipment in an emergency.
IMO expert investigations have focused mainly on the complex quick-release hooks that typically suspend enclosed lifeboats from their davits, which are designed to hold tons of mass securely for years at a time and then come free quickly when the lifeboat is lowered. The Maritime Safety Committee expects new guidelines to enter into force on 1 January 2020, addressing longstanding issues including the need for uniform and documented standards for hook servicing.
However, a failure to follow correct procedures and lack of proper training have also been cited as contributory factors in incidents. The Transas Survival Craft Simulator allows such training to be conducted either at a training centre or on-board in a benign environment, allowing trainees to learn essential procedures, such as the preparation of survival craft, its launch and boarding, but without the risk.
At the heart of the new simulator is a highly detailed virtual model of a totally enclosed davit-launched, self-righting lifeboat. It is supported by a functional model to simulate the hook-release gear, wire lashings and gripes, and for boat securing onto a davit. Instruction on using the release handle, a safety pin, and hydrostatic interlock level can be delivered either virtually or with a physical device connected to the simulator.
"No one doubts the importance of effective survival craft training," said Frank Coles, Transas Chief Executive Officer. "Guidance issued by insurers reaffirms that crew should be capable of operating lifeboat systems and understanding the mechanics and procedures, but training itself cannot be the source of risk. The majority of the maritime industry stakeholders still have some way to go to fully embrace the use of simulation to enhance and improve competency in shipboard operations. This tool is further evidence of that competence can be raised safely and efficiently without endangering lives. The time for platitudes is over; resources and recurrent training save lives and enhance safety."
Survival Craft Simulator was created to function under Transas Academy, the seafarer competency development component of THESIS. In the future, this oversight will enable data collected during exercises to feed into and inform other aspects of vessel and fleet operation.

Sep 14, 2017

 QRCode for link to Transas Survival Craft Simulator Eliminates Drill Risks story
 

Marine Equipment

Unique Group Partners with INNOVO, Kongsberg

Innovo’s reel drive system (Photo: INNOVO)

Integrated subsea and offshore solution provider Unique Group has entered into a cooperation

John Deere Rolls Out Trio of Marine Engines

4045SFM85 (Photo: John Deere Power Systems)

John Deere Power Systems has expanded its lineup with three new marine engines available for order

TELEC Certifies Intellian’s GX100 and GX60 Terminals

Intellian, a provider of maritime satellite antenna systems, announced the certification of its GX100 and GX60 Inmarsat FX terminals by TELEC, the radio equipment certification

Maritime Safety

Hornblower NYC Ferries Carrying Sea-Fire Protection

Photo courtesy fo NYC Ferry Service

Safety is a paramount concern to the NYC Ferry Service. That's why each of Hornblower's new fleet

Ampelmann Gangway System Increases Operational Efficiencies

Photo: Ampelmann

Ampelmann has enhanced its existing E1000 gangway transfer system to speed up conversion of its

Drying Diving Suits in an Underwater Safety Facility

Photo courtesy of Auxilium Offshore

Auxilium Offshore, specialized in the provision of mission equipment for the international

Technology

Unique Group Partners with INNOVO, Kongsberg

Integrated subsea and offshore solution provider Unique Group has entered into a cooperation agreement with Aberdeen’s INNOVO. As part of the agreement

John Deere Rolls Out Trio of Marine Engines

John Deere Power Systems has expanded its lineup with three new marine engines available for order from early 2018.   The new 4.5L PowerTech 4045SFM85 offers high power to weight

Alfa Laval’s PureSOx Tallies 100+ Installs

Alfa Laval PureSOx (Photo: Alfa Laval)

To date, a total of 109 vessels have been installed with Alfa Laval PureSOx platform for