rss icon Subscribe
desktop mobile

New Thruster Solutions Developed for Arctic Shipping

© Alexey Nagaev / Adobe Stock

A team of European marine research institutes and companies have developed creative technologies for thruster solutions that are specifically engineered for ships operating in the Arctic.

With the new solutions created under the three-year ArTEco project led by Finland's VTT and Wärtsilä, thruster lifetimes can be increased, their maintenance need can be decreased and their reliability improved, particularly in extreme conditions, the project partners said.

While at sea, a ship must overcome tough resistance as it displaces water masses from its path. Ice creates extreme loads when the power of the ship's engine is directed through the ice by the propeller. Extreme loads wear the propulsion equipment, or thruster, thereby shortening the life cycle and reducing technical reliability. Limited operations or even equipment failure cause direct and indirect costs for owners, operators and equipment and component manufacturers

The ArTEco (Arctic Thruster Ecosystem) project involved the development of innovative technologies and solutions for mechanical and rotating propulsion technology in extreme conditions. According to VTT, the results will enable the better use of ships, and the predictability of loading and failure. ArTEco has revealed a clear path to further possibilities to optimize the design of equipment even more effectively and secure the full capabilities of vessels in difficult ice conditions. Environmental loads will also be reduced when maintenance vessels are less often needed in sensitive, Arctic sea areas.

VTT developed and measured damping solutions for torsional vibrations, caused by issues such as the impact of propeller blades on ice.

"The results of the project can be applied on various vessels, icebreakers and the autonomous ships of the future, which will be able to operate in both non-Arctic and Arctic sea areas. The smart products and services of the future and new, competitiveness-boosting business opportunities will be created via the ecosystem projects. The best international research institutes in the field and industrial contributors were involved in the project," said Project Coordinator Jari Halme of VTT.

The project also involved the development of cutting-edge propeller simulation and load-specification methods, vibration damping solutions, environmentally friendly lubricants, measurement technology, and the improvement of the gear unit's load carrying capacity. These led to the creation of innovative, tested and reliable solutions. For example, changing external hubcap shapes reduced the maximum ice impact load by 30 percent, while a damper reduced vibration in the transmission by more than 20 percent. The results have been achieved in a full-scale testing environment. Similar measurements and testing have earlier never been done in this size and scale.

"ArTEco has allowed us to increase the technology readiness level for several promising solutions for propulsion products. At Wärtsilä we are committed to innovation and are continuously working in different ways to provide better products for our customers," said Anders Hedin, Project Coordinator at Wärtsilä.

VTT and Wärtsilä coordinated the ArTEco project, in which the following organizations were also involved: ATA Gears, Katsa, the Finnish Transport Safety Agency, Tampere University of Technology, SKF, TU Luleå, Klingelnberg and TU Dresden. The main funders of the project are Business Finland in Finland, Sjöfartsverket in Sweden and state funding in Germany. The project is part of the European MARTEC II (Maritime Technologies as an ERA-NET).

Oct 5, 2018

 QRCode for link to New Thruster Solutions Developed for Arctic Shipping story
 

Technology

DMC Steering System For Fisheries Vessel

Damen Marine Components is to supply the steering system for Austral Fisheries’ fishing vessel Cape Arkona. Pictured is a Van der Velden COMMANDER rotary vane steering gear, one of the components of the installation. (Photo: Damen Shipyards Group / Van der Velden)

Damen Marine Components (DMC) is to supply a steering system for Austral Fisheries’ trawler Cape

Hybrid Propulsion for Acta Centaurus

The Acta Centaurus will be fitted with a Wärtsilä hybrid solution for fuel savings and better environmental performance. (Photo: Acta Marine)

Acta Centaurus, a new DP2 walk-to-work offshore wind construction support vessel owned by

Fernandina Terminal to Use Octopi TOS

Image: Navis

Worldwide Terminals Fernandina (WTF) will implement Octopi, the cloud-based TOS from Navis

Marine Propulsion

DMC Steering System For Fisheries Vessel

Damen Marine Components (DMC) is to supply a steering system for Austral Fisheries’ trawler Cape Arkona, which is currently under construction at the Baatbygg yard at Maløy in

World's First: Torqeedo Powers Electric Freefall Lifeboat

Image: Torqeedo

The German manufacturer of electric outboards Torqeedo provided the integrated propulsion system

Burckhardt Supplies Laby Compressors for LNG Vessel

Image: Burckhardt Compression

Swiss firm specialising in reciprocating compressors, Burckhardt Compression AG is outfitting a 30

Marine Equipment

ACO Marine, Clarimar Sign Equipment Order

Photo: ACO Marine

ACO Marine has secured an order from Turkish naval architect Soyaslan Design to design and

Atlas Copco Acquires CA Distributor

Photo: Atlas Copco Compressors LLC

Atlas Copco Compressors LLC has acquired the assets of California based distributors Accurate Air

Kalmar Supplies Hybrid Shuttle Carriers to Virginia Port

Image: Kalmar

Kalmar, part of Cargotec, has announced that it will supply 25 Kalmar Hybrid Shuttle Carriers to