rss icon Subscribe
desktop mobile

Alfa Laval’s HCO Filter Approved by MAN Diesel & Turbo

Moatti 290 filter (Image: Alfa Laval)

The Alfa Laval Moatti 290 filter for hydraulic control oil (HCO) has been approved by MAN Diesel & Turbo on its modern two-stroke engines following validation tests aboard three Stena Bulk IMOIIMAX vessels.

The Alfa Laval Moatti 290 filter is a high-performance solution suited to the new generation of MAN Diesel &Turbo two-stroke engines, in which hydraulic control systems have replaced traditional camshafts. The valves of these systems are actuated by a small flow of lube oil, which must be very finely filtered without creating additional pressure drop. The new filter achieves this using Alfa Laval Atrium technology, which provides a tremendous increase in filtering surface within a compact space.

The filter was approved based on the results seen on four Stena Bulk vessels, where the HCO filter's performance has exceeded all expectations.

"We are extremely proud to have the Alfa Laval Moatti 290 filter validated for use with HCO systems," said Herve Gourdon, Business Manager, Filters at Alfa Laval. "This is the culmination of 10 years of intense cooperation, development and testing."

Alfa Laval began discussing the filter with MAN Diesel & Turbo in 2008, when the engine manufacturer started its transition from camshafts to hydraulic control systems. The fine HCO filtration required by the engine design demanded an entirely new filter technology. Alfa Laval's prototype HCO filter, presented in 2014, spent over 24,000 hours in concept testing aboard the Suezmax crude oil tanker Stena Suède.

"After almost two years of operation on Stena Suède, we tested the finalized design for 3000 hours on three other vessels," Gourdon said. "MAN Diesel & Turbo approval was issued when the first vessel passed that mark, acknowledging our filter's performance with hydraulic control oil."

The Alfa Laval Moatti 290 filter is built to the most recent MAN Diesel & Turbo recommendations, which require both an automatic filter and a redundant filter with high enough efficiency to retain particles of 6 µm and below. These are incorporated into the same frame, with a specially designed changeover valve to prevent any leakage during maintenance.

"Alfa Laval makes sure to stay on top of changing engine maker specifications," Gourdon said. "Our HCO filter reflects the latest developments and eliminates the need for any disposable filter."

The redundant filter, which is manually cleanable, can be used not only during maintenance, but also for initial oil cleaning or when new oil is added into the system. It is not used, however, to clean the small flow of oil that provides continuous backflushing. Instead, this flow is cleaned in a diversion chamber before it is returned to the sump. "Our solution is designed so that the redundant filter is not continuously employed, for example to treat the backflush," Gourdon explained. "Rather, the redundant filter is fully separated in order to ensure it will be fully operational in the case of emergency."

The continuous backflushing of the Alfa Laval Moatti 290 filter is driven by the pressure of the oil itself. This means no electricity or air supply is needed, which is one of several ways the filter simplifies installation. Because backflushing is performed in the automatic filter stage, with a cleanable surface-filter cartridge used to provide redundancy, reliance on disposable filters is eliminated.

"Ship owners are looking for an economical long-term solution, rather than a quick fix," Gourdon said. "Disposable filter elements add up to a significant cost over time, whereas components in the Alfa Laval Moatti 290 filter can be removed for cleaning and simply put back into operation. Combined with the reliability achieved by continuous backflushing, that means a lower operating cost for the filter overall."

At present, the Alfa Laval Moatti 290 filter covers the vast majority of MAN Diesel & Turbo two-stroke engines, with focus on the more common mid-range sizes. Coverage for the very largest and smallest engines will follow. Those who wish to see the filter first-hand will have the opportunity at two upcoming exhibitions, Posidonia (June) and SMM (September), where it will be featured in Alfa Laval's stand.

"Having both MAN Diesel & Turbo approval and extremely successful results to present, we're looking forward to discussing the Alfa Laval Moatti 290 filter directly with customers," Gourdon said.

Apr 26, 2018

 QRCode for link to Alfa Laval’s HCO Filter Approved by MAN Diesel & Turbo story
 

Marine Propulsion

Nordic Lady: Keeping a Good Boat Up to Date

The Nordic Lady all back together and ready for sea trials. (Photo: 
 Southeast Diesel)

When Trygve Westergard bought the 98- by 28-foot Judi B in the spring of 2016 he was entering a

Spliethoff Group Prepares for 2020 Sulphur Cap

Photo: Spliethoff Group

On June 26, Spliethoff’s MV Floragracht left the BLRT shipyard in Klaipeda, Lithuania

Down Angle Gearbox Developed to the Next Level

Photo: REINTJES GmbH

The Down Angle gearbox series WVSA first exhibited by REINTJES in 2016 will be presented at this

Marine Equipment

Samson Launches Solution to Streamline MEG4 Transition

(Image: Samson)

Samson, the developer of high-performance synthetic rope solutions and global market leader in

FarSounder-1000s for New Expedition Cruise Ships

(Photo: FarSounder)

U.S. based marine electronics manufacturer FarSounder said it has received an order for four

Wartsila's Ship Technology Outlook Brightens

A Wärtsilä hybrid scrubber system (Image: Wärtsilä)

Ship technology and power plant maker Wartsila missed profit expectations on Thursday

Marine Power

World’s First High Temperature Accelerometer Unveiled

For the monitoring of gas turbines: the new acceleration and pressure sensors, plus fitting charge amplifiers from Kistler (Photo: Kistler)

Kistler has introduced what it says is world’s first high temperature accelerometer for the

Nordic Lady: Keeping a Good Boat Up to Date

When Trygve Westergard bought the 98- by 28-foot Judi B in the spring of 2016 he was entering a new chapter in a varied marine career. Growing up on a remote island off Ketchikan

Spliethoff Group Prepares for 2020 Sulphur Cap

On June 26, Spliethoff’s MV Floragracht left the BLRT shipyard in Klaipeda, Lithuania, where she was outfitted with an exhaust gas cleaning system (scrubber).