rss icon Subscribe
desktop mobile

CMS Completes First Major WinGD X-DF Engine Overhaul

CSSC Marine Service completed the first X-DF overhaul in nine days. (Photo: CSSC Marine Service Co)

MarineLink

China State Shipbuilding Corp (CSSC) equipment service subsidiary CSSC Marine Service Co (CMS) said it has completed the first ever major overhaul on two WinGD X-DF engines-in only nine days.

The twin 6X62DF engines overhauled belong to the first ever X-DF powered vessel in operation, 2017-built 180,000-cbm liquefied natural gas (LNG) carrier SK Audace, owned and operated by SK Shipping Co. LTD. The work was performed while the ship was at the Sabine Pass anchorage in Texas.

In the three years since vessel delivery, the X-DF engines installed on SK Audace had reached 18,000 operating hours, more than 99% of which were gas operation and less than 1% diesel operation required for maneuvering. Scheduled maintenance was required to ensure continuous uninterrupted operation.

The CMS Korea team completed full maintenance on the two engines within nine days, and the ship returned to commercial service after a successful sea trial run. All this despite the travel, logistics, health and safety working plans caused by COVID-19.

imageThe CMS Korea team of service engineers carrying out the maintenance on board the LNG carrier SK Audace (Photo: CSSC Marine Service Co)

Although work scopes were varied, CMS and WinGD collaborated to execute the job according to the standard manual for that engine type. Original spare parts such as piston rings and gas components were delivered to the vessel's location by CMS.

During the overhauls, no abnormalities were found. However, the team overcame the challenge of the unknown and being the first ever to perform maintenance on X-DF technology. The CMS Korea team prepared their work guidelines well which included the reservation of correct materials and real-time support from the WinGD design team. In doing so, the CMS Korea team solved all challenges encountered and were able to reduce the maintenance time to nine days. The CMS Korea team also observed that the 6X62DF engine parts were in good condition compared to engines historically overhauled by CMS that operate on heavy fuel oil (HFO).

Following the overhaul, the trial run of the engines was performed in service power and optimized engine performance was calibrated. To ensure optimal engine operating standards through to the next periodic maintenance, the CMS Korea team conducted maintenance on common components such as pistons, exhaust valves, flow limiting valve were overhauled and fuel pump component-replacements where necessary. Additionally, the overhaul included more complex gas components such as gas admission valves (GAV), pre-chamber replacements and gas valve units (GVU).

"As the first ever X-DF engines, I had concerns about the scope of the project. But the CSSC Marine Service team demonstrated their ability with a fast and professional overhaul," a SK Audace superintendent said." Working closely with WinGD really made a difference to how quickly we were able to resume operations."

imageSK Audace, Owned and operated by SK Shipping Co. LTD (Photo: SK Shipping Co. LTD)

In total, 10 X-DF engines on five vessels will be overhauled by CSSC Marine Service in the coming months. Results of the ongoing condition-based investigation on all five vessels will enable increased TBO (time between overhaul) or CBM (condition-based maintenance) decisions, to be agreed between the ship owner and classification society.

Andrew Stump, President CMS said, "For customers who operate X-DF engines and have concerns about service accessibility, CMS is able to provide qualified service through our growing network. This is the first X-DF major engine overhaul completed and our team provided such a short turnaround time for a twin-engine installation.

"The results recorded in the service reports have been investigated together with WinGD product managers in the Swiss headquarters, and we are all extremely happy with the condition and cleanliness of engine components, in particular compared to an engine of the same running hours operating on HFO. The results of investigation by WinGD will enable any design optimization necessary and extension of the time between overhauls where appropriate. Once we have comparative results from the sister vessels we will be able to confirm the success of the X-DF product as the most reliable and sustainable LNG main engine solution."

To-date, CMS has established three service hubs located in South Korea, Singapore and Hamburg. In addition to the service hubs and operates five service stations located in China (Qingdao, Gaungzhou, Chengxi and Shanghai), South Korea, Singapore, Hamburg and Switzerland. Partner service stations are also located in countries including Brazil, Turkey, Poland, South Africa, Oman, Qatar, Dubai, US, New Zealand and Greece.

"As the demand for our services grows, CMS will continue its expansion into more locations worldwide," Stump said.

Jul 23, 2020

 QRCode for link to CMS Completes First Major WinGD X-DF Engine Overhaul story
 

Marine Propulsion

Cat Powers Brusco's New Tugs

(Photo: Caterpillar Marine)

Caterpillar Marine recently signed a contract to supply its solutions for the next generation of

Engineering for Tier 4

A 3D production model of a Robert Allan Ltd. tug, showcasing a Cat 3516E Tier 4 marine engine with SCR installation. (Image: Robert Allan Ltd.)

As one of the largest, most widely known naval architecture and marine engineering firms in the

Rolls-Royce to Boost Output for the US Navy

(Photo: U.S. Navy)

Rolls-Royce and the Defense Production Act Title III office will invest millions of dollars to

Marine Equipment

Siemens, Carlyle Near $2.4 Billion Deal Over Flender Business

(Image: Flender)

U.S. buyout group Carlyle Group Inc is nearing an agreement to acquire Siemens AG's mechanical

Tech File: oneTank Ballast Water Treatment System

oneTank ballast.jpg

In mid-September, the U.S. Coast Guard Marine Safety Center issued the 35th USCG Ballast Water

Danish Consortium Developing Ammonia-fueled Engine

© ibreakstock / Adobe Stock

Innovation Fund Denmark, the Danish investment entity, has announced the establishment of a