rss icon Subscribe
desktop mobile

Tech File: Automating Ballast Ops When Installing BWMS

Image: W&O/EMI

MarineLink

Installing ballast water treatment systems to comply with new regulations will require owners to automate ballast operations on board their vessels or barges. Retrofitting ballast water treatment systems generally requires modifications to the existing ballast systems. Many older vessels have remote operated valves, but no automation of the ballast system. EMI has been working with parent company W&O to provide blue water barges with innovative solutions to add automation functionality to their fleet.

When ballast water treatment systems are added to vessels, it requires piping modifications and additional valves to isolate, bypass, and engage ballast water treatment systems. Many of the legacy remote operated valve control systems on board do not have the capability to automate operations, and in many cases, are not expandable to control the newly added valves. Working closely with customers, EMI has designed solutions to replace legacy systems with custom new hardware and software that can automate a variety of modes of operation. Using visually intuitive graphics and onscreen prompts, EMI can provide single touch control to initiate a predefined sequence of turning on/off pumps and opening or closing valves for modes such as Warm up, Ballasting, De-ballasting, Can Flushing and Bypass operations. The sequences are custom tailored to the client's needs, based on the piping configuration, ballast treatment type and customer procedures on board.

Manufacturers of ballast water treatment systems are often unwilling to relinquish control of the valves in their systems, and unable to take control of valves and pumps outside of their equipment scope of supply due to regulatory constraints, leaving a gap in controls between the legacy valve control system and the new ballast water treatment system.

EMI and W&O work collaboratively with the client, and the BWT equipment manufacturer to determine what valves and piping are needed to install the BWT system, and to develop protocols to provide a 'handshake' between the ballast control valve automation system and ballast water treatment. This handshake ensures the two systems are communicating, and that the valves and pumps are correctly configured prior to starting/stopping ballast treatment operations.

The system consists of a Touchscreen and Ballast Control Panel. The touch screen provides the operator an interface using virtual pushbuttons and gauge displays for real-time control and indication of device states throughout the barge. The Valve Control Panel is the core of the system. Power is supplied to the panel from the vessel's main 115VAC switchboard.

The panel includes a PLC with associated I/O module to receive input signals from the HMI in the control room. The PLC processes the input signals, generates appropriate output signals, sends those signals to the valves, and communicates valve status to the HMI over an Ethernet network. EMI can provide systems with a variety of communication protocols to match vessel and BWT equipment requirements, including Modbus, PROFIBUS, PROFINET, AS-i, and DeviceNet. The panel includes a 24VDC power supply, UPS, and battery to provide power to the system in case of loss of main power.

A set of relays drive remote and local audible outputs in the case of a system fault.

May 20, 2020

 QRCode for link to Tech File: Automating Ballast Ops When Installing BWMS story
 

Technology

Seastema Autopilot Achieves DNV GL Type Approval

(Image: Seastema)

Naval automation and navigation systems supplier Seastema said its SEAS-PILOT HCS autopilot system

Seatronx Launches Digital Matrix SCC

Photo: Seatronx

Seatronx announced the launch of the Seatronx Digital Matrix Switching Command Control system (SCC).

Wärtsilä Launches Remote Support Center

Photo: Wärtsilä

Technology group Wärtsilä has launched of its global Smart Support Center service.

Marine Equipment

WinGD’s Dual-fuel 12X92DF Engine Gains BV Type Apprval

WinGD’s dual-fuelled X92DF engine, the first in a series that will power nine ULCS for CMA CGM Group (Photo: WinGD)

The biggest and most powerful liquefied natural gas (LNG)-fueled engine ever built has received

Vestdavit to Equip US Navy Expeditionary Sea Base Newbuilds

The ESB 6 and ESB 7 are being built by NASSCO to the same design as the earlier ESB4, USS Hershal ‘Woody’ Williams, Woody, here pictured during sea trials (credit: NASSCO).

Boat launch and recovery systems supplier Vestdavit said it will deliver motion-compensated davits

Cox’s Diesel Outboard Enters Production

(Photo: Cox Powertrain)

UK-based engine manufacturer Cox Powertrain said its purpose-designed 300hp CXO300 diesel outboard

Ballast Water Treatment

Evac BWMS Chosen for Irish Lights vessel

ILV Granuaile (Photo: Evac Group)

The Evac Evolution ballast water treatment system (BWMS) will be installed on the ILV Granuaile

Techcross Secures USCG BWMS Type Approval

© Larry / Adobe Stock

The U.S. Coast Guard Marine Safety Center issued a Ballast Water Management System (BWMS) Type

Alfa Laval Maintains BWTS Production Despite COVID-19

(Image: Alfa Laval)

Having quickly adapted to the ongoing COVID-19 pandemic and lockdown measures from the Danish