rss icon Subscribe
desktop mobile

Beele Engineering Introduces NOFIRNO Gaskets

Beele Engineering's NOFIRNO Technology Based Gasket (Photo: Beele Engineering)

Gabby DelGatto

Traditional gaskets must be fastened tightly to be properly sealed. This accelerates wear and tear, compromising the seal's function. To prevent this, Beele Engineering has developed a gasket based on NOFIRNO rubber.

These gaskets can be used in environments with temperatures ranging from -50 Degrees C to 180 Degrees C (-58 Degrees F to 356 Degrees F). The Beele Engineering gaskets stand out due to their exceptional profile and high-quality rubber. Tests of up to a maximum of 15 bar were conducted. With a press-on forces of approx 6 8 Nm a lasting seal is created. Due to the NOFIRNO rubber's restorative capacity, the gaskets can be reused after the flange has been unscrewed and is then tightened down again.

The NOFIRNO gaskets are available in a range of versions and dimensions. There are round, square and rectangular gaskets, as well as 1,000 x 1,000 mm gasket sheets, from which non-standard shapes can be cut. The gaskets come in a thickness of 5 or 10 mm.

Due to the NOFIRNO rubber's fire-resistant, smoke, gas and watertight qualities, the gaskets can be used in environments where fire or water can have or has free range. They are also approved for use in drinking water applications.

Another important feature for outside applications is that the NOFIRNO rubber is UV, ozone and weather-resistant.

Jun 26, 2018

 QRCode for link to Beele Engineering Introduces NOFIRNO Gaskets story

Marine Equipment

Wärtsilä to Assist Transocean with Thruster Maintenance

Wärtsilä and Transocean will optimize the maintenance of all Wärtsilä thrusters installed within the Transocean fleet, while seeking to reduce dry-docking costs by extending the

CTG Wash Water Monitor Installed on Scrubber Retrofit in China

The installation represents one of the first scrubber retrofits to be carried out in a Chinese yard, a reflection of the industry-wide acceleration in the global scrubber market. (Photo: CTG)

A Sea Sentry wash water monitoring system for ship exhaust gas cleaning systems from maritime

ZPMC USA Expands Coast-to-coast

A newly-raised crane is repositioned from the work site back to the wharf to return to service in Charleston, S.C. (Photo: ZPMC)

ZPMC USA is currently working on 25 cranes in nine locations that showcase a broad range of

Maritime Safety

Roxtec Secures Order for Britain’s $265m Polar Ship

Photo: Roxtec

International manufacturer Roxtec is helping protect Britain’s new £200m ($265m) polar research

Orolia: FCC Approval for SmartFind EPIRB


Orolia reports that it has received approval from the U.S. Federal Communications Commission (FCC)

Larson Electronics: New Emergency LED Light

HALP-EMG-48-2L-LED-SS Main (Photo: Larson Electronics)

Larson Electronics LLC announced the release of a new hazardous area LED light. The product is

New Products

Actisense Expands Its PRO Range

Photo: Actisense

Actisense has officially launched the latest addition to its PRO range at Seawork International in

Down Angle Gearbox Developed to the Next Level


The Down Angle gearbox series WVSA first exhibited by REINTJES in 2016 will be presented at this

Orolia: FCC Approval for SmartFind EPIRB

Orolia reports that it has received approval from the U.S. Federal Communications Commission (FCC) and Innovation, Science and Economic Development (ISED) for its McMurdo