rss icon Subscribe
desktop mobile

MOL Adopts 'Common Rail Fuel Injection' System

Main engine equipped with common rail fuel injection system Photo MOL

By Joseph R Fonseca

Mitsui O.S.K. Lines, Ltd. announced that its group company, Mitsui O.S.K. Kinkai, Ltd. will use a main engine equipped with the MAN Diesel & Turbo SE (MDT)-developed "common rail fuel injection system" on a newbuilding vessel.

Shop test of the main engine was completed on January 29 and the vessel is slated for launching in 2018. After launched, Mitsui O.S.K. Kinkai, MDT and Makita Corporation(President: Yu Makita; headquarters: Takamatsu-shi, Kagawa Prefecture)will continue testing the system with support from MOL while the vessel is in service.

The pilot engine for MDT, manufactured by Makita Corporation, is the first to adopt the MAN B&W 2 Cycle engine. Makita Corporation manufactures and sells small-displacement engines through sub-license agreement with Mitsui Engineering & Shipbuilding Co., Ltd., a licensee of MDT.
The system can inject fuel oil from fuel valves that incorporate solenoid valves, at the optimal timing, with the optimal volume, and in the optimal pattern to maximize engine output, by increasing the fuel oil pressure to 1,000 bars with an electric pump, and storing the fuel oil at high pressure in the common rail pipe. The system also uses hydraulic pressure, instead of the conventional camshaft, to operate the exhaust valves allowing for electronic control and enabling the valves to open and close more freely. This makes fuel consumption more efficiently even in low road ranges. Tests confirm that the system can reduce fuel consumption, especially in part load, compared to an electronically controlled "6S35ME-B" engine of the same displacement.
In addition, the system's simple configuration is expected to reduce operation and maintenance costs, minimizing costs over the entire life cycle of the engine.
In the future, MDT is considering that the system can be adopted on main engines that use alternative fuels other than heavy oil, which allows a flexible response to environmental issues such as global warming and stricter international regulations on exhaust emissions from vessels.
The MOL Group has moved ahead with its technology development initiative, the "ISHIN NEXT -MOL SMART SHIP PROJECT-," and continually takes a proactive stance in the development and introduction of various technologies that will help reduce the environmental impact of its activities.

Mar 9, 2018

 QRCode for link to MOL Adopts 'Common Rail Fuel Injection' System story

Marine Propulsion

Seastreak Ferry Built with Delta 'T' Systems' Technology

Photo: Delta "T"

Seastreak's new Commodore-class high-speed catamaran ferry is launching with Delta "T"

Cummins QSK95 Propulsion for Ferry Newbuild

(Image: Cummins)

Azam Marine’s next newbuild, Kilimanjaro VII, will be the first passenger ferry powered by QSK95

Sanmar Orders 42 Rolls-Royce Thrusters

(Photo: Rolls-Royce)

Rolls-Royce said it has secured an extensive supply order from long-time collaborator Sanmar


BWMS with Automatic Filter Receives USCG Certificate


Technology enterprise Boll & Kirch said one of its product innovations, the Bollfilter Automatic

IMO recommends Fleet Safety for GMDSS


Fleet Safety from Inmarsat, a new service incorporating FleetBroadband and a Maritime Safety

When it comes to moving fluids, Albin delivers

With a line of 12 General Purpose Pumps, Albin Pump Marine  delivers reliable performance, at an appealing price point. Photo Albin Pump Marine

Whether on board or dockside, Albin Pump Marine makes moving fluid an easy task with its line of

Fuels & Lubes

Alfa Laval BlueBox SA prevents oily water discharge problems

Alfa Laval BlueBox SA  Photo courtesy Esbjörn Ljunggren; Alfa Laval

Non-compliant discharge of oily water continues to be an environmental threat – and an expensive

Mercury Introduces V-6 FourStroke Outboards

Photo: Mercury Marine

Mercury Marine has introduced its new V-6 FourStroke outboard family and the expansion of its

DNV GL Revises Stern Tube Bearing Class Notations

Propeller shaft system (Photo: DNV GL)

DNV GL has revised its class rules for single stern tube bearing installations and introduced two