rss icon Subscribe
desktop mobile

First Class Approved 3D Printed Ship’s Propeller Unveiled

(Photo: Damen)

Posted by Eric Haun

The world's first Class approved 3D printed ship's propeller, the WAAMpeller, has been unveiled following rigorous testing verified by Bureau Veritas at Damen Shipyard Group's headquarters in the Netherlands.

The groundbreaking propeller is the result of collaboration between RAMLAB, Promarin, Autodesk, Bureau Veritas and Damen, who started pooling collective resources and knowledge to develop the world's first 3D printed ship's propeller seven months ago. Promarin provided the design of the triple-blade propeller. The Port of Rotterdam's RAMLAB (Rotterdam Additive Manufacturing LAB) carried out fabrication using Wire Arc Additive Manufacturing (WAAM) techniques, supported by Autodesk's expertise in software, robotics and additive manufacturing.
Damen provided Research and Development resources in addition to one of its Stan Tug 1606 vessels for operational testing purposes. Bureau Veritas' role was to verify the entire development, production and testing process.
The consortium reached its first milestone in August with the completion of the first WAAMpeller prototype. With valuable experience gained, production of the second version, with the aim of achieving class certification, started immediately.
"Production of the second WAAMpeller was greatly improved because we had learned a lot from producing the prototype," said Vincent Wegener, Managing Director RAMLAB. "This mainly concerned the hardware/software interaction because, when laying down 298 layers of Nickel Aluminium Bronze alloy, it is important to have a tight control on all process parameters."
With the second WAAMpeller complete, the project then progressed to the testing stage, the first phase of which saw the WAAMpeller installed on a Damen Stan Tug 1606. "This particular vessel is of extra interest in that it is equipped with a Tier III compliant engine, making it future proof for the ever stricter environmental rules and regulations in harbours around the world", said Martin de Bruijn, Managing Director Workboats at Damen.
Damen's testing engineers performed operational testing of the WAAMpeller on November 20, with representatives from all of the consortium partners present. Furthermore, the day's procedures were overseen by Bureau Veritas surveyors throughout.
Martijn Nieuwenhuijs, Chief Executive of Bureau Veritas Marine & Offshore Netherlands, said, "Bureaus Veritas has witnessed every step of the making and testing of the WAAMpeller. Some challenges needed to be tackled along the way, but the final product is technically sound and ready for commercial application."
The testing program included bollard pull and crash stop testing in addition to speed trials. "Of course, we were all a bit nervous beforehand - after all, innovation always comes with a certain amount of unknowns - but the testing was a success," said Kees Custers, Damen Project Engineer R&D enthusiastically.
"The WAAMpeller displayed the same behavior as a conventional casted propeller in all of the tests. This includes the same level of performance in the crash stop scenario, which - going from full throttle ahead to full throttle reverse - is the heaviest loading that a propeller can experience.
"From day one, this project has been characterized by a good working atmosphere and team dynamics, so there were quite a few high-fives on board when we had successfully completed the tests!"
Talking before the WAAMpeller unveiling event on November 30, Allard Castelein, CEO Port of Rotterdam, took the time to highlight the efforts of the collaborating partners: "The WAAMpeller project is special for many reasons. Not only has it produced the world's first class approved 3D printed ship's propeller, but this has been accomplished within a very impressive seven-month timeframe and only one year after the official opening of RAMLAB."
"Everyone involved has worked extremely hard to make this happen. Damen, Autodesk and Bureau Veritas have supported the project all the way. Promarin have really shown their expertise with the finishing of this WAAMpeller. And last, but not least, the production process at RAMLAB continued 24/7, with their experts permanently on hand."
Looking at the bigger picture, Castelein went on to identify the implications of the WAAMpeller project on the maritime industry. "This project has shown the shipbuilding industry the potential of 3D printing techniques for the production of vessel components. We continue our intensive research into this very exciting area."

Nov 30, 2017

 QRCode for link to First Class Approved 3D Printed Ship’s Propeller Unveiled story
 

Marine Equipment

Rolls-Royce Gas Turbine Selected for Japan’s New Frigate

NM022.MT30.TEST.5.jpg

Rolls-Royce reports it has been selected to supply its MT30 gas turbine to power a new class of

Successful Factory Acceptance Test for The Switch EBL

The Switch expects its advanced and proven DC-Hub concept, with the unique EBL, will see tremendous growth. The DC-Hub distributes energy without the need for auxiliary equipment such as transformers and AC switchboards. (Photo: The Switch)

The Switch Norway, part of Yaskawa Corporation’s Yaskawa Environmental Energy Division

New Water Booster Pumps for Polvo FPSO

© Kyksin D. / MarineTraffic.com

As part of the life extension project for the Polvo Floating production storage and offloading

Marine Propulsion

Rolls-Royce Gas Turbine Selected for Japan’s New Frigate

Rolls-Royce reports it has been selected to supply its MT30 gas turbine to power a new class of frigates for the Japan Maritime Self Defence Force (JMSDF).

Eniram Signs On LNG Powered Bulk Carrier Project

(Image: Arista Shipping)

The Project Forward initiative, which is led by Athens-based Arista Shipping, has produced an

Successful Factory Acceptance Test for The Switch EBL

The Switch Norway, part of Yaskawa Corporation’s Yaskawa Environmental Energy Division, reports it has completed a Factory Acceptance Test (FAT) for its Electronic Bus Link

New Products

Versatile, Lightweight Nylon Plugs for Yachts

Photo: HFT

Round hole blocking just became easy with Pipestoppers Nylon Plugs, designed for hundreds of

RedPort Global Unveils New Satellite Device

Photo: RedPort Global

A new satellite device that combines the Inmarsat Fleet Xpress Network Service Device (NSD) with

Barrus Showcases New Engines at Seawork

Photo: Barrus

Barrus pioneered the innovative Post Immersion Restart System (PIRS) in the late 1970s for the