rss icon Subscribe
desktop mobile

Most Auxiliary Engine Damage Caused by Human Error

Photo: The Swedish Club

Posted by Michelle Howard

An investigation by The Swedish Club into auxiliary engine damage has revealed that the majority of all damage takes place immediately after maintenance work. A key finding is that 55 percent of casualties occur within only 10 percent of the time between overhaul (TBO), corresponding to the first 1,000 hours or so of operation after overhaul. In most cases the damage occurs only a few hours after start up.

The report, Auxiliary Engine Damage, also finds that container vessels have a significantly higher claims frequency due to the larger number of installed engines on these vessels. In addition these engines have considerable output, leading to higher repair costs compared with other vessels.
Auxiliary Engine Damage, the latest report from The Swedish Club, has been created in response to the Club's members' concerns over damage to auxiliary engines - a significant segment of machinery claims, both in number and in cost.
Peter Stålberg, Senior Technical Adviser at The Swedish Club explained, "Auxiliary engines run at high revolutions and have a common lubrication system for both cylinder and crank case lubrication. They are not under the same strict regime from the classification society as the main engine, and maintenance is often carried out by the vessel crew."
Stålberg continued, "We see incorrect maintenance and wrongful repair in all too many cases, and poor lubrication management is also a major contributing factor to auxiliary engine break downs. With an average repair cost of more than $345,000, we cannot emphasise enough the principle that prevention is better than cure."

Jan 8, 2018

 QRCode for link to Most Auxiliary Engine Damage Caused by Human Error story
 

Fuels & Lubes

MAN's Part-Load Optimization a Fuel Saver

close-up on engine (Image: MAN Diesel & Turbo)

Part-Load Optimization tuning method proves popular, delivers significant fuel savings for MAN

DNV GL Launches Project to Test Biodegradable Lubricants

Photo: DNV GL

Classification society DNV GL has launched a new joint development project (JDP) in cooperation

Chelsea Technologies' Sea Sentry Secures ClassNK Certification

Photo: Chelsea Technologies

Chelsea Technologies announced that its Sea Sentry wash water monitoring system for ship exhaust

Marine Equipment

MAN's Part-Load Optimization a Fuel Saver

Part-Load Optimization tuning method proves popular, delivers significant fuel savings for MAN auxiliary engines   MAN Diesel & Turbo’s Part-Load Optimization is a tuning method

ChartCo Launches New FleetManager Portal

Photo: ChartCo

ChartCo, a global supplier of maritime digital data and compliance services, has announced the

GE Ships LM2500 Marine Gas Turbine for US Navy

GE LM2500 GT hanging angle shot (Photo: GE Marine)

GE's Marine Solutions division said it has shipped a LM2500 marine gas turbine propulsion module

Marine Power

MAN's Part-Load Optimization a Fuel Saver

Part-Load Optimization tuning method proves popular, delivers significant fuel savings for MAN auxiliary engines   MAN Diesel & Turbo’s Part-Load Optimization is a tuning method

GE Ships LM2500 Marine Gas Turbine for US Navy

GE's Marine Solutions division said it has shipped a LM2500 marine gas turbine propulsion module that will help power the U.S. Navy's 75th DDG Arleigh Burke-class destroyer Jack H.

Robot Lasers Prolong Engine Pistons’ Lifespan

QuantiServ laser cladding (Photo: Wärtsilä)

New robotized laser cladding technology aims to revolutionize the reconditioning of large bore