rss icon Subscribe
desktop mobile

Rolls-Royce Acquires Electrically-assisted Charging Technology

Posted by Eric Haun

Rolls-Royce said it has acquired from G+L innotec the exclusive rights of use for a new technology for the electrically-assisted charging of off-highway combustion engines in the power range above 450 kW. The new invention from the development and engineering services provider based in Laupheim in southern Germany is protected by patents and has thus not been available on the market to date. Rolls-Royce plans to offer engines of its MTU brand with this technology as of 2021.

"Electrically-assisted charging is a milestone on the way to the hybridizing of the engine. Using this technology, it will be possible for us to develop agile, low-consumption engines," said Dr. Johannes Kech, Director of Development Turbocharging & Fluid Systems at MTU.
MTU and G+L innotec will complete the next stages of development on the basis of a close partnership.
The electrically-assisted charging system comprises an electric drive combined with a traditional turbocharger developed and manufactured by MTU. As a result, the turbocharger can be accelerated electrically and the charge pressure built up earlier. In operating conditions, in which the energy required for a faster charge pressure of the turbine would normally not be sufficient, it is also possible to build up with the aid of the electric drive. Using the technology developed by G+L innotec, MTU will be able to increase the acceleration capability of marine engines, for example, and also the load response capabilities of generator drives significantly, Rolls-Royce said. In addition it will also be possible to reduce the engine's fuel consumption and emissions in a variety of different applications. Due to the increased load response capability, emergency standby gensets will be able to deliver their full output even faster than was previously the case. This technology is ideally suited to diesel and gas engines.
To provide the turbocharger with electrical assistance, a permanent magnet is installed upstream of the compressor wheel and the electrical winding is integrated into the casing of the compressor. With this arrangement, the air drawn in by the compressor is not obstructed and at the same time the electrical components are cooled by the air. The special feature of this arrangement is the large gap between the magnet and winding. This so-called media gap motor requires specially designed power electronics. This ensures that there is no aerodynamic impact on the charger and also that existing chargers can be adapted easily to enable them to make use of this technology.
On the basis of a development collaboration agreement with G+L innotec, MTU has equipped turbochargers with this electric drive and has carried out component tests to determine its possible potential. In the next stage, the two partner companies will prepare the new products for series production, so that as of 2021, MTU will be able to launch engines equipped with this technology on the market. The first areas of application suitable for these engines include ships, emergency gensets and land vehicles.

Sep 25, 2017

 QRCode for link to Rolls-Royce Acquires Electrically-assisted Charging Technology story
 

Marine Equipment

Hub Extension Adds 2.5" to Schmitt & Ongaro Wheels

Photo: Schmitt & Ongaro

Whether to increase leg room, optimize a standing position or provide added clearance for improved

New Tow Hook for Norwegian Lifeboats

Red Cross lifeboat Veritas demonstrates its towing hook in port at Tjome, Norway (Photo: Henriksen Hooks)

Henriksen showed its new towing hook for first time in the U.S. at the New Orleans International

Kyriacou to Lead De Nora's BWMS Unit

Dr. Stelios Kyriacou (Photo: De Nora)

Electrochlorination equipment supplier De Nora announced that Dr. Stelios Kyriacou has been

Marine Power

ABB’s First Azipod D Unit Begins Operation

(Photo: ABB)

An 8,000 kW rescue tug, the first vessel installed with ABB’s Azipod D electric propulsion system

MAN Brings Latest Tech to Marintec

The MAN 45/60CR engine was unveiled in September 2017 at MAN Diesel & Turbo’s headquarters in Augsburg, Germany (Photo: MAN Diesel & Turbo)

MAN Diesel & Turbo has brought its new 45/60CR and ME-LGI engines, as well as its innovative

Yanmar Acquires Flexofold

Flexofold manufactures low-drag folding propellers for sailboats and multihull yachts (Photo: Flexofold)

Yanmar said it has reached an agreement to acquire of 100 percent of the shares in Denmark based

Marine Propulsion

ABB’s First Azipod D Unit Begins Operation

An 8,000 kW rescue tug, the first vessel installed with ABB’s Azipod D electric propulsion system, has been delivered by Huangpu Wenchong Shipyard to customer Guangzhou Salvage

MAN Brings Latest Tech to Marintec

MAN Diesel & Turbo has brought its new 45/60CR and ME-LGI engines, as well as its innovative HP-SCR emissions reduction technology to Marintec 2017, which is being held this week

Yanmar Acquires Flexofold

Yanmar said it has reached an agreement to acquire of 100 percent of the shares in Denmark based propeller manufacturer Flexofold ApS. With the acquisition Flexofold